Replacing A Backup Drive; Preliminary Steps - Fujitsu PRIMERGY TX1310 M3 Upgrade And Maintenance Manual

12.3.3 Replacing a backup drive

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver (for removing the PSU)

12.3.3.1 Preliminary steps

"Suspending BitLocker functionality" on page 61
Ê
"Removing backup and optical disk media" on page 63
Ê
"Verifying and configuring the backup software solution" on page 63
Ê
"Shutting down the server" on page 44
Ê
"Disconnecting the power cord" on page 45
Ê
"Getting access to the component" on page 46
Ê
"Extending the HDD cage out of the chassis" on page 47
Ê
12.3.3.2 Replacing a backup drive
Ê Remove the defective backup drive, see section
on page 170.
Ê Remove the fixation plate from the left side of the defective backup drive.
Figure 105: Attaching the fixation plate to the backup drive
Ê Align the four pins on the fixation plate with the screw holes in the new
backup drive.
TX1310 M3
Upgrade and Maintenance Manual
Accessible drives
Hardware: 15 minutes
"Removing a backup drive"
171