12.3.3 Replacing a backup drive
Field Replaceable Unit
(FRU)
Preliminary and concluding steps: tool-less
Tools:
Removing accessible drives: Phillips PH2 / (+) No. 2 screw driver
12.3.3.1 Preliminary steps
Before installing an accessible drive, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Remove any backup medium from the drive.
Ê Shut down the server as described in section
page
52.
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page
55.
12.3.3.2 Replacing a backup drive
Ê Remove the defective backup drive as described in section
backup drive" on page
Ê Install the new backup drive as described in section
on page
252.
TX1320 M1
73.
257.
Upgrade and Maintenance Manual
Accessible drives
Hardware: 10minutes
"Disabling BitLocker
"Shutting down the server" on
"Opening the server" on
"Removing
"Installing backup drive"
261