REP 1.8 MBF Gear Cover
Parts List on PL 4.2
Removal
Switch off the power and disconnect the Power Cord.
1.
Remove the MBF Assembly (REP 2.1).
2.
Remove the screw that secures the Left MBF Gear Cover to the left side of the Paper
Handler (Figure 1).
3.
Release the three locking tabs and remove the MBF Gear Cover (Figure 1).
4.
The MBF 2 Idler Gear (Figure 1) may come off with the cover.
5.
Release the locking tabs and remove the harness from the MBF Cover (Figure 1).
Figure 1 MBF Gear Cover
Replacement
1.
Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2025/N2825
WARNING
REP 1.9 Rear Cover
Parts List on PL 6.1
Removal
Switch off the power and disconnect the Power Cord.
1.
Open the Rear Cover.
2.
Disconnect P/J527 and P/J528 (Figure 1).
3.
Remove the two screws that secure the Rear Cover support straps to the Rear Cover
(Figure 1).
4.
With the cover positioned as show in Figure 1, lift the left end (as viewed from the rear of
the printer) of the Rear Cover and remove (Figure 1).
Replacement
1.
Reinstall the components in the reverse order.
02/2000
4-9
WARNING
Figure 1 Rear Cover
Repair-Adjustment
REP 1.8, REP 1.9