Xerox DocuPrint N2025 Service Manual page 299

Switches on and off the driver power transmission to the Turn Roll Assembly. When the printer
with the Pre-feed function receives /PRFD from the Controller and pre-feeds paper, it de-actu-
ates the Turn Clutch Assembly to stop the rotation of the Turn Roll Assembly and thereby
keeps the pre-fed paper waiting just before the Registration Sensor, and then actuates the Turn
Clutch Assembly again when it receives the subsequent /START.
Retard Pad –
Prevent extra sheets of paper from fed from the Tray Assembly MBF by the friction between the
paper and the rubber of the Pad Retard.
No Paper Sensor –
Detects when the MBF Tray is out of paper.
No Paper Sensor 1 –
Detects when the Tray 1 is out of paper.
Figure 1 MBF Tray Assembly
Initial Issue General Procedures / Information
02/2000
GP 5.13
DocuPrint N2025/N2825 6-67