Rep 3.7 Mbf Assembly Position - Xerox DocuPrint N2025 Service Manual

REP 3.7 MBF Assembly Position

Parts List on PL 4.2
Removal
Switch off the power and disconnect the Power Cord.
1. Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect it from
light.
2. Remove Tray 1.
3. Remove the Left Side Cover (REP 1.1).
4. Remove the MBF Assembly (REP 2.1).
5. Remove the Retard Chute Assembly (REP 3.1).
6. Remove Tray 1 Left Guide Assembly (REP 3.6)
7. Remove the two screws and remove the cover (Figure 1).
8. Release the locking tabs and remove the sensor from the Guide Assembly (Figure 1).
Figure 1 MBF Assembly Position Sensor
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2025/N2825
WARNING
02/2000
4-23
Repair-Adjustment
REP 3.7