Xerox DocuPrint N2025 Service Manual page 359

Table 16 Plug/Jack (P/J) Connector Locations
Location (Note 1)
Coordinate
P/J s Location
Name PL
181 E-34 HVPS PL 9.1
182 D-33 HVPS PL 9.2
183 G-8 Paper PL 9.1
Transport
185 E-33 HVPS PL 9.1
186 C-33 HVPS PL 9.1
187 C-33 HVPS PL 9.1
188 E-33 HVPS PL 9.1
201 H-26 Tray 1 PL 3.1
Guide Left
202 H-26 Tray 1 PL 3.1
Guide Left
211 C-7 Print Car- PL 8.1
tridge
Sensor
Assembly
222 E-7 Paper PL 5.1
Transport
311 F-27 System PL 9.2
Controller
PWB
312 H-26 System PL 9.2
Controller
PWB
421 B-6 Console PL 1.1
Assembly
Initial Issue
DocuPrint N2025/N2825
Harness (Note 2)
Harness Name Notes
(Note 3) Item #
HVPS Harness 22 Connects HVPS and
Assembly Print Engine Controller
PWB.
Fuser Harness 10 Connects HVPS and
Assembly Fuser Assembly.
HVPS Harness 22 Connects Paper Trans-
Assembly port (Regi Sensor) and
Print Engine Controller
PWB.
Print Cartridge PL 9.1 Connects HVPS and
(TR) Print Cartridge (TR).
Print Cartridge PL 9.1 Connects HVPS and
(CR) Print Cartridge (CR).
Print Cartridge PL 9.1 Connects HVPS and
(DB) Print Cartridge (DB).
Print Cartridge PL 9.1 Connects HVPS and
(DTS) Print Cartridge (DTS).
SNS Harness PL 3.1 Connects Tray 1 Guide
Assembly Left (Size Switch) and
Print Engine Controller
PWB.
SNS Harness PL 3.1 Connects Tray 1 Guide
Assembly Left (CST Sensor) and
Print Engine Controller
PWB.
Print Cartridge 23 Connects Print Car-
Sensor Harness tridge Sensor Assem-
Assembly bly and Print Engine
Controller PWB.
REGI Harness PL 9.1 Connects Paper Trans-
Assembly port (Regi Clutch) and
Print Engine Controller
PWB.
System Controller 3 Connects System
PWB 3.3V Har- Controller PWB and
ness Assembly LVPS.
System Controller 4 Connects System
PWB 5V Harness Controller PWB and
Assembly SMB-5V.
Convertible Har- PL 9.1 Connects Console
ness Assembly Assembly and MCV
PWB.
Table 16 Plug/Jack (P/J) Connector Locations
Location (Note 1)
Coordinate
P/J s Location
Name PL
501 I-34 Duplex I/F PL 9.2
502 I-34 Duplex I/F PL 9.2
503 I-34 Duplex I/F PL 9.2
504 I-34 Duplex I/F PL 9.2
505 I-34 Duplex I/F
506 J-34 Duplex I/F PL 9.2
507 G-5 Exit PL 6.1
Assembly
519 J-6 Exit PL 6.1
Assembly
526 D-5 Bracket PL 7.1
Assembly
OCT-L
527 E-26 HV Cover PL 6.1
528 E-26 HV Cover PL 7.1
621 J-8 Fuser PL 8.1
Interlock
Switch
622 J-8 Fuser PL 9.1
Interlock
Switch
623 H-7 Guide PL 8.1
Print Car-
tridge-R
02/2000
7-29
Harness (Note 2)
Harness Name Notes
(Note 3) Item #
Duplex I/F Har- PL 9.1 Connects Duplex I/F
ness Assembly PWB and Print Engine
Controller PWB.
Duplex Full -I/F PL 9.1 Connects Duplex I/F
Harness Assem- PWB and Full Stack
bly Sensor.
Duplex PWB - Connects Duplex I/F
PWB and Duplex
Assembly.
STK-I Harness PL 9.1 Connects Duplex I/F
Assembly PWB and Stacker
Assembly.
Flap-I Harness PL 9.1 Connects Duplex I/F
Assembly PWB and Flapper
Module.
LVPS Harness PL 9.2 Connects Duplex I/F
Assembly item 1 PWB and LVPS.
Full Stack Sensor 18 Connects Full Stack
Harness Sensor and Duplex I/F
PWB.
Direction Sole- 13 Connects Flapper
noid Harness Module and Duplex I/F
PWB.
STK-I Harness PL 6.1 Connects Stacker
Assembly Assembly and Duplex
I/F PWB.
Full Stack Sensor 18 Intermediate Connec-
Harness tors. Connects Full
Stack Sensor and
Duplex I/F PWB.
Direction Sole- PL 6.1 Intermediate Connec-
noid Harness tors. Connects Flapper
Module and Duplex I/F
PWB.
I/L Harness 6 Connects Fuser Inter-
Assembly lock Switch and LVPS.
I/L Harness 6 Connects Interlock
Assembly Switch and I/R Switch.
I/L Harness 6 Connects I/R Switch,
Assembly Fuser Interlock Switch
and LVPS.
Wiring Data
Base Engine