Xerox DocuPrint N2025 Service Manual page 322

The Figure below is a perspective view that shows the drive power transmission through the
gears of the OCT Assembly Figure 5.
Figure 5 Perspective View of Power Transmission
OCT Assembly Main Component Function Figure 6 & Figure 7
The function of the major components of the optional OCT Assembly is described here.
Exit and Offset
OCT PWB - Drives the OCT Motor Assembly and the Offset Motor Assembly according to the
control signals from the Print Engine Controller PWB through the Duplex Interface PWB. The
OCT PWB also relays the signals from the sensors and switches connected to it to the Duplex
Interface PWB.
OCT Sensor - Detects the paper jam between the Roll Inlet and the Roll Offset in the OCT
Assembly. This sensor is a micro switch.
Sensor Photo: Full Stack - Detects the paper full on the exit tray.
General Procedures / Information
GP 5.23
Switch Interlock - Detects the open of the Cover Assembly Rear.
Roll Inlet - Deliveries the paper to the Offset Assembly.
Roll Offset - Discharges the paper to the OCT Output Tray.
Motor Assembly OCT - Generates the drive power. The power is transmitted to the Inlet Roll
and Offset Roll.
Motor Assembly Offset - Generates the drive power to discharge the paper adding offset. The
power is transmitted to the Guide offset Arm.
Figure 6 OCT Major Components
02/2000
6-90
Initial Issue
DocuPrint N2025/N2825