Rep 11.9 Feed Head Assembly - Xerox DocuPrint N2025 Service Manual

REP 11.9 Feed Head Assembly

Parts List on PL 11.3
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the printer from the 500 Sheet Paper Feeder (REP 11.1).
2. Remove the paper tray from the feeder.
3. Remove the Front Cover (REP 11.2).
4. Remove the Left Cover (REP 11.3)
5. Disconnect P/J13A, P/J13P, and P/J135 from the Feed Head Assembly (Figure 1).
6. Remove the screw that secures the Feed Head to the feeder frame (Figure 1).
7. Push the right locking pin down and slide the right end of the Feed Head forward (Figure
1).
8. Push the left locking pin down and slide the left end of the Feed Head forward (Figure 1).
9. Slide the Feed Head forward and remove (Figure 1).
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2025/N2825
WARNING
Figure 1 Feed Head Assembly
02/2000
4-67
Repair-Adjustment
REP 11.9