Gp 3.3 Menu Maps - Xerox DocuPrint N2025 Service Manual

6. If an entry exists in any item that contains a string, all characters to the right of the cursor,
including the current cursor position, may be cleared by entering a "space" character in
the current cursor position, and pressing "Enter."
7. Pressing the Up or Down "Menu" keys at any time after step 2 causes a return to the top
of the current menu without changing a value.
8. Pressing On-line at any time causes the Control Panel to exit the Menu system.
3.5 Access to Special Operating Modes
The printer may be placed in special diagnostic or other operating modes by turning on power
while holding down two keys on the Control Panel. Table 3 shows the key combinations for
each mode:
Table 3 Access to Special Operating Modes
Key Combinations Mode
On-line and Enter Sets a flag in RAM so that the Control Panel enables the
"Reset" menu.
Menu Up and Menu Down Forces the "Download" mode on the Parallel port.
Item Up and Item Down Forces the "IOT Diagnostic" mode.
Value Up and Value Down Forces the "Monitor Mode" on the Serial port.
On-Line and Value Down Forces NVM to be reset to Factory defaults.
3.6 Control Panel Lock
Some of the menus in the Control Panel may be "locked" to prevent unauthorized access and
changes to system parameters. This is accomplished with the PJL "CPLOCK" command. If the
user scrolls to a locked menu, pushing either "Item" key will cause the menu name to appear
on the top line, and the "Menu Locked" to appear on the second line. Only the following menus
are available from the Control Panel when locked:
• Job Menu
• Password Menu
• Tray Menu
• Print Menu
• Reset Menu
General Procedures / Information
GP 3.2, GP 3.3

GP 3.3 Menu Maps

This chapter shows the menu structure in graphical format. Refer to Chapter 5 for an explana-
tion of the items in these menus. The names of menus, items and values found in the menu
maps contain the English language strings for reference only. Use to ref. 10 for the official list of
menu strings. The order of menus, items, and values found in the menu maps is the order in
which these strings are displayed when scrolling through the menu items. The "first" menu,
item or value is at the top of the list and the "last" menu, item or value is at the bottom of the list.
Selecting an "Up" key causes scrolling from first to last. Pressing a "Down" key causes scrolling
from last to first.
Some of the Menus and Items in the following maps are only displayed if an associated option
is installed. These options entries are flagged with the symbol "_" following the entry.
Figure 1 Job Menu/Print Menu/Reset Menu
02/2000
6-24
Initial Issue
DocuPrint N2025/N2825