Xerox DocuPrint N2025 Service Manual page 238

1. Basic Specifications
Table 1 Basic Specifications
Category Specification
Standard configuration Print engine- MBF- 500-sheet Paper Feeder- A4/Letter Cassette
(500-sheet universal paper cassette)
- Print Cartridge
Printing method Xerography
Exposing method Scanning with a laser light beam
Laser light source Laser Diode (Nominal maximum output: 10 mW)
Print image resolution Fixed-resolution version: 600 or 1200 dpi
Fusing method Applying heat and pressure with rolls
Warm-up time Within 50 seconds from a cold start after power (nominal
100V,120V, 220V) is switched on.(Measured at 72° F (22° C) ambi-
ent temperature with the specified voltage)
Max. paper size MBF:76.2 508 mm (Standard)76.2 900 mm (Optional)Short Cas-
sette (Standard):279.4 215.9 mm (US) 297 210 mm (European/
Japan)Long Cassette (Optional):279.4 431.8 mm (US) 297 420
mm (European/Japan)
Printable area The print quality is not guaranteed in a 4 mm border from all edges
in the printable area.
Paper storing capacity MBF Feeder 1 Feeder 2* Feeder 3* (*Optional)150 + 500 + 500 +
500 † Sheets of standard paper (Xerox 4024DP 20lb paper or FX L
paper)
Delivery Tray capacity About 500 printed sheets of fresh paper*1 under the normal condi-
tion*2*1: Just unpacked paper after having been left in the package
for 12 hours in the operating environment*2: Condition with a tem-
perature of 72° F (22° C) and a humidity of 55 to 60% RH
2. Electrical Specifications
Table 2 Electrical Specifications
Power Supply 100/120V Version:100/120 VAC (90 ~ 140 V), 50/60 Hz (47 ~ 63
Hz)220/240V Version: 220/240 VAC (198 ~ 264 V), 50/60 Hz (47 ~
63 Hz)
Power consumption 110-127 VAC rated consumption max: 1.1 kw electrical current max
9A
220-240 VAC rated consumption max: 1.1 kw electrical current max
4.5A
3. Mechanical Specifications
Table 3 Mechanical Specifications
Size and weight (with the Width: 490 mm (19.3 inches) Depth: 585 mm (23 inches) Height:
A3/Letter cassette and 395 mm (15.6 inches) Weight: 27 kg (59.5 lbs.)
without the Print Car-
tridge and options)
General Procedures / Information
GP 2.1
Table 3 Mechanical Specifications
Minimum space require- Front: Min. 760 mm (30 inches) Right side: Min. 100 mm (4 inches)
ments Left side: Min. 200 mm (8 inches) Overhead clearance: Minimum
500 mm (19.7 inches)
02/2000
6-6
Initial Issue
DocuPrint N2025/N2825