2000 Sheet Feeder - Xerox DocuPrint N2025 Service Manual

2000 Sheet Feeder

Location of P/J Connectors
Use the P/J table below and the P/J map on the next page to locate a specific P/J connector
within the Feeder and Cassette. To find the location of a P/J:
1. Locate the P/J connector number in the first column of the table.
2. Locate the corresponding coordinates in the second column, such as I7 or J7.
3. Go to the map.
4. Cross-reference the letter and number of the P/J coordinates with the letters and numbers
on the map.
5. The P/J connector is located within the area where the coordinates cross.
Table 1 P/J Table
Coordinat
Connector e Description
J131 B7 Connects the 2000 Sheet Feeder-1 Harness to the IOT Directly Con-
nect or Under the Feeder 2.
P/J 601 I5 Connects the 2000 Sheet Feeder-1 Harness to the 2000 Sheet
Feeder PWB.
P/J 602 J5 Connects the 2000 Sheet Feeder NPS Harness to the 2000 Sheet
Feeder PWB.
P/J 603 J5 Connects the 2000 Sheet Feeder FRDY Harness to the 2000 Sheet
Feeder PWB.
P/J 604 J4 Connects the 2000 Sheet Feeder SW Harness to the 2000 Sheet
Feeder PWB.
P/J 605 I5 Connects the Elevation Motor to the 2000 Sheet Feeder PWB.
P/J 606 I4 Connects the 2000 Sheet Feeder FDM Harness to the 2000 Sheet
Feeder PWB.
P/J 607 J4 Connects the 2000 Sheet Feeder TFM Harness to the 2000 Sheet
Feeder PWB.
P/J 608 H9 Connector' inside the Elevation Motor.
P/J 609 H9 Connects the 2000 Sheet Feeder FDM Harness to the Feed Motor.
P/J 610 E8 Connects the 2000 Sheet Feeder NPS Harness to the No Paper
Sensor.
P/J 611 F8 Connects the 2000 Sheet Feeder FRDY Harness to the Paper Level
Sensor.
P/J 612 G10 Connects the 2000 Sheet Feeder SW Harness to the A4/Letter
Switch.
P/J 613 H8 Connects the 2000 Sheet Feeder SW Harness to the Read Cover
Open Switch.
P/J 614 F9 Connects the 2000 Sheet Feeder SW Harness to the Cassette Indi-
cator Switch.
P/J 615 C8 Connects the 2000 Sheet Feeder TFM Harness to the Drive Assem-
bly Motor.
Wiring Data
02/2000
7-44
Figure 1 P/J Map
DocuPrint N2025/N2825
Initial Issue