Rap 46 0102 - Dimm 2; Rap 47 0101 - Dimm 3 - Xerox DocuPrint N2025 Service Manual

RAP 46 0102 - DIMM 2

Procedure
Switch off the printer power. Remove the Left Side Cover (REP 1.1) and the Shield Cover.
Remove the DIMM installed in Slot 2 (J5). Switch the printer power on. "0102
error message is displayed on the Control Panel.
Y N
Switch the printer power off. Install the removed DIMM into Slot 1 (J4). Switch the printer
power on. "0101 - DIMM 1" error message is displayed on the Control Panel.
Y N
Switch the printer power off. Remove the DIMM from Slot 1 (J4) and reinstall it into
Slot 2 (J5). Switch the printer power on. "0101 - DIMM 1" error message is dis-
played on the Control Panel.
Y N
Attribute problem to a poor connection of the DIMM on the System Controller
PWB and go to Final Actions.
Replace the System Controller PWB (REP 8.1).
Replace the DIMM (PL 9.1).
Replace the System Controller PWB (REP 8.1).
Initial Issue
DocuPrint N2025/N2825

RAP 47 0101 - DIMM 3

Procedure
Switch off the printer power. Remove the Left Side cover (REP 1.1) and the shield cover.
- DIMM 2" Remove the DIMM installed in Slot 3 (J6). Switch the printer power on. "0103
error message is displayed on the Control Panel.
Y N
Switch the printer power off. Install the removed DIMM into Slot 1 (J4). Switch the printer
power on. "0101 - DIMM 1" error message is displayed on the Control Panel.
Y N
Switch the printer power off. Remove the DIMM from Slot 1 (J4) and reinstall it into
Slot 3 (J6). Switch the printer power on. "0101 - DIMM 1" error message is dis-
played on the Control Panel.
Y N
Attribute problem to a poor connection of the DIMM on the System Controller
PWB and go to Final Actions.
Replace the System Controller PWB (REP 8.1).
Replace the DIMM (PL 9.1).
Replace the System Controller PWB (REP 8.1).
02/2000
2-45
- DIMM
Status Indicator Repair Analysis Procedures
RAP 46, RAP 47
3"