Rep 12.6 Front Cover; Rep 12.7 Tray Assembly - Xerox DocuPrint N2025 Service Manual

REP 12.6 Front Cover

Parts List on PL 12.1
Removal
Switch off the power and disconnect the Power Cord.
1. Open the 2000 Sheet Feeder Tray.
2. Remove the two screws that secure the front cover (Figure 1).
3. Pull the top of the cover out and up to remove (Figure 1).
Figure 1 Front Cover
Replacement
1. Reinstall the components in the reverse order.
Repair-Adjustment
REP 12.6, REP 12.7
WARNING

REP 12.7 Tray Assembly

Parts List on PL 12.4
Removal
Switch off the power and disconnect the Power Cord.
1. Pull the 2000 Sheet Feeder Tray out until it stops.
2. Remove all paper from the tray.
3. Push and hold the button on the Left Rail to release the latch (Figure 1).
4. Remove the Tray Assembly (Figure 1).
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-80
WARNING
Figure 1 Tray Assembly
DocuPrint N2025/N2825
Initial Issue