Rep 11.12 Turn Roll Assembly; Rep 11.13 Retard Chute Assembly - Xerox DocuPrint N2025 Service Manual

REP 11.12 Turn Roll Assembly

Parts List on PL 11.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the printer from the 500 Sheet Feeder (REP 11.1).
2. Remove the paper tray from the feeder.
3. Remove the Front Cover (REP 11.2).
4. Remove the Left Cover (REP 11.3).
5. Remove the 500 Sheet Feed Head Assembly (REP 11.9).
6. Remove the two screws that secure the Gear Cover (Figure 1). Remove the gear cover.
7. Release the locking tab and remove the turn gear (Figure 1).
8. Remove the E-rings and bearings from the left end of the turn shaft (Figure 1).
9. Remove the Turn Roll Assembly (Figure 1).
Figure 1 Turn Roll Assembly
Replacement
1. Reinstall the components in the reverse order.
Initial Issue
DocuPrint N2025/N2825
WARNING

REP 11.13 Retard Chute Assembly

Parts List on PL 11.3
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the printer from the 500 Sheet Feeder (REP 11.1).
2. Remove the paper tray from the feeder.
3. Remove the Front Cover (REP 11.2).
4. Remove the Left Cover (REP 11.3).
5. Remove the 500 Sheet Feed Head Assembly (REP 11.9).
6. Tilt the retard chute forward.
7. Use a screwdriver to pry up the right end of the chute (Figure 1).
8. Slide the chute to the right and remove (Figure 1).
Figure 1 Retard Chute Assembly
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-69
WARNING
Repair-Adjustment
REP 11.12, REP 11.13