500 Sheet Feeder - Xerox DocuPrint N2025 Service Manual

500 Sheet Feeder

Location of P/J Connectors
Use the P/J table below and the P/J map on the next page to locate a specific P/J connector
within the Feeder and Cassette Table 1.To find the location of a P/J:
1. Locate the P/J connector number in the first column of the table.
2. Locate the corresponding coordinates in the second column, such as I7 or J7.
3. Go to the map.
4. Cross-reference the letter and number of the P/J coordinates with the letters and numbers
on the map.
5. The P/J connector is located within the area where the coordinates cross.
Table 1 P/J Locations
Location (Note 1)
Coordinate
P/J s Location
Name PL
13A D8 Feeder PL 11.2 Harness
Assembly
13B B4 Feeder PL 11.2 Feed Motor Con-
Assembly
J131 B8 Feeder PL 11.2 Harness
Assembly
131 B10 Feeder PL 11.2 Harness
Assembly
132 D4 Feeder PL 11.2 Harness
Assembly
133 B4 Feeder PL 11.3 Harness
Assembly
Wiring Data
500 Sheet Feeder
Harness (Note 2)
Harness Name Notes
(Note 3) Item #
23 Intermediate connec-
tors between J13A of
the NPS Harness and
J13A of the Feeder
Harness.
33 Connects the Feed
nector Motor to the Feeder
PWB.
24 Connects the Har-
ness Assembly J131
to the Harness
Assembly J136 of the
Upper Feeder (Feeder
1 or Feeder 2).
28 Connects the Har-
ness Assembly J131
to the Harness
Assembly J131 of the
Lower Feeder (Feeder
3).
Connects the Har-
ness Assembly J131
(the harness for con-
nection to the Feeder
PWB of the upper
Feeder (Feeder 1 or
Feeder 2)) to the
Feeder PWB of the
Feeder.
27 Connects the Feeder
Harness to the Feeder
PWB.
Location (Note 1)
Coordinate
P/J s Location
Name PL
134 F8 Feeder PL 11.2 Harness
Assembly
135 D8 Feeder PL 11.3 Harness
Assembly
136 D5 Feeder PL 11.2 Harness
Assembly
137 C9 Feeder PL 11.3 Harness
Assembly
138 C4 Feeder PL 11.3 Harness
Assembly
139 B10 Feeder PL 11.3 Harness
Assembly
02/2000
7-32
Table 1 P/J Locations
Harness (Note 2)
Harness Name Notes
(Note 3) Item #
23 Connects the No
Paper Sensor to the
Harness Assembly
J134.
27 Connects the Feed
Solenoid to the Feeder
Harness.
24 Connects the Har-
ness Assembly J136
(the harness for con-
nection to the Feeder
PWB of the lower
Feeder Assembly
J136 (Feeder 3)) to the
Feeder PWB of the
Feeder.
26 Connects the Low
Paper Sensor to the
Feeder Harness.
26 Connects the SNS
Harness to the Feeder
PWB.
27 Connects the Size
Sensor to the SNS
Harness.
DocuPrint N2025/N2825
Initial Issue