Lcd Status Message List - Oki OKIPAGE 24DX Service Manual

4.3.1 LCD Status Message List

The listing of the statuses and problems displayed in the form of messages on the LCD is provided in Table 4-1.
Classification LCD Status Message
Jam Error
Paper size error
Tray paper out
mmmmmmmm:
Paper size in the tray
being selected
Interface Timeout
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIPAGE 24DX/24DXn
Chapter E Multi Feeder Maint. (option)
Description
Notifies of occurrence of jam
while the paper is being fed from
the Multi-Feeder.
Notifies of incorrect size paper
feeding from the Multi-Feeder.
Notifies of no paper state of the
Multi-Feeder.
Notifies of occurrence of
interface timeout between the
printer and the Multi-Feeder.
Page: 215
Recover Method
- Check the paper in the
Multi-Feeder. Carry out the
recover printing by opening the
cover, removing jammed paper
and closing the cover, and then
turning the error display off.
- When the problem occurs
frequently, go through the
Troubleshooting.
- Check the paper in the
Multi-Feeder. Also check to see
if there was a feeding of multiple
sheets. Carry out the recovery
printing by opening the cover,
and then turning the error
display off.
- Load the paper in the
Multi-Feeder.
- Verify connection of
AOLE-PCB and square-shaped
connector.
Replace the square-shaped
connector if necessary.
- Replace AOLE-PCB.