Roller Feed (C) - Oki OKIPAGE 24DX Service Manual

Page: 45
Service Guide OKIPAGE 24DX/24DXn
Chapter 3 Parts Replacement

3.3.15 Roller feed (C)

(1) Remove the guide assy-eject. (See 3.3.13)
(But roller transfer/feeder unit-front/plate-FG(F) do not have to be removed)
(1) (2)
(2) Remove the gear roller (C) and bushing , bend (a) part of the plate-FG (BK) (3). Take off the carrier bearing
(4) (5)
and remove the roller feed (c) in the direction of the arrow.
Note !
Be careful not to deform (a) part of the plate-FG (BK) (3).