Oki OKIPAGE 24DX Service Manual page 233

6.5.3 Image Troubleshooting
Procedures for troubleshooting for the cases of abnormal image printouts are explained below.
Figure 6-3 below shows typical abnormal images.
Problem
Images are light or blurred entirely (Figure 6-4, A )
Dark background density (Figure 6-4, B )
Blank paper is output (Figure 6-4, C )
Black belts stripes in the vertical direction (Figure 6-4, D )
Cyclical defect (Figure 6-4, E )
Print voids
Poor fusing (images are blurred or peeled off when touched by hands)
White belts streaks in the vertical direction (Figure 6-4, F )
Snowy print of high density pattern (Figure 6-4, H)
Blotchy faded print (Figure 6-4, I)
A Light or blurred images entirely B Dark background density
D Black vertical stripes
H Snowy print of high density
pattern
Figure 6-3 Image Problems
Service Guide OKIPAGE 24DX/24DXn
Chapter 6 Troubleshooting Procedures
E Cyclical defect
I Blotchy faded print
Flowchart number
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
C Blank paper
F White vertical belts
or streaks
Page: 107