Oki OKIPAGE 24DX Service Manual page 33

Page: 14
Service Guide OKIPAGE 24DX/24DXn
Chapter 2 Operation Description
2.3.1 Electro-photographic process mechanism
This mechanism prints image data from the control board on the paper by electro-photographic process.
The Figure 2-4 shows the layout of the electro-photographic process mechanism.
(1) Image drum unit
The image drum unit consists of a sensitive drum, a charger, and a developer. The unit forms a toner image on the
sensitive drum, using a electrostatic latent image formed by the LED head.
(2) Hopping motor
This motor is a pulse motor of 48 steps/rotation that is two-phase excited by the signal from the control board. It
drives the hopping roller of the first tray and the front feed roller via two one-way clutches according to the direction
of rotation.
(3) Motor-Main