Oki OKIPAGE 24DX Service Manual page 192

Prints current menu setting.
Ready Light on: execution by
command.
Ready Flash: execution by
switch.
Requests that a sheet indicates
in the second line message is
inserted by hans.
YYYYYYYY: sheet type (PAPER,
ENVELOPE)
Promotes a forced exit by FORM
FEED switch when the time set
in WAIT TIME OUT of AUTO
OPERATION in the level 2 menu
has been passed since no data
received.
Indicates that the face down
stacker is full with sheets.
Indicates that no paper or paper
cassette in a tray.
Indicates that, in an attempt to
use the third tray, the first or
second tray which is the medium
of the path is pulled out.
Indicates that, in an attempt to
use the second tray, the first tray
which is the medium of the path
is pulled out. Provisions: The
first and second tray should be
returned.
Requests that a sheet indicates
in the first line message is
inserted.
Indicates that the interpreter
detects an error due to the
following reasons. From this
point on, the receiving data is
flushed until the completion of a
job. It is automatically canceled
when job receiving is completed.
Normal operation.
Set requested paper to front
tray, and press FORM FEED
button.
Press FORM FEED button.
Remove the paper from the
stacker. Repair the broker
stacker sensor cable. Repeat the
insertion and removal of the
connector. Clean or replace the
stacker full sensor.
Load paper or paper cassette to
the tray.
Install the displayed tray.
Load the requested paper tray.
Warning. Check the print job
format.