Parts Replacement Methods - Oki OKIPAGE 24DX Service Manual

Page: 171
Service Guide OKIPAGE 24DX/24DXn
Chapter D Second / Third Paper Feeder Maint (option)

3.3 Parts Replacement Methods

This section describes the parts replacement methods for the components listed in the disassembly order diagram
below.
High Capacity
Second / Third Paper Feeder Roller assy hopping, Roller assy feed (3.3.1)
Cover front assy (3.3.2)
Board-BBB (3.3.3)
Lever paper end, Lever paper near end (3.3.4)
Motor (3.3.5)
Connector (IMSA-9714N-14B), Connector (IMSA-9714N-14A) (3.3.6)
Frange Pulley, Pulley Idle, Mini Pitch belt, Plate Earth shaft, Gear double, Tray switch assy (3.3.7)
Roller feed (3.3.8)
Bracket sub roller (3.3.9)
Frame side L (3.3.10)
Frame side R (3.3.11)
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)