Oki OKIPAGE 24DX Service Manual page 167

(12) Setting of High Capacity Third Paper Feeder paper feed length
l
This function sets the paper feed length of the High capacity Third paper feeder.
(13) Selection of High Capacity Third paper feeder download table
l
This function selects the download table for the High capacity third paper feeder.
(14) Setting of Multi Feeder paper feed length
l
This function sets the paper feed length of the Multi Feeder.
(15) Selection of Multi Feeder download table
l
This function selects the download table for the Multi Feeder.
(16) Setting of duplex feed length
l
This function sets the paper feed length of the duplex.
(17) Fuser count display
l
Displays on the LCD the total number of printed pages counted at the engine.
(18) Fuser count reset
l
When the fuser unit is replaced, the maintenance person uses this fuser count reset function to reset the fuser
lifetime.
l
After the fuser counter is reset, the engine enters into the operation mode automatically
(19) Engine reset
l
All EEPROM areas used by the engine are reset to the factory default values.
l
The following items are excluded:
* Menu level-1
* Menu level-2
* Operator panel menu disable/enable
* Page print disable/enable
l
Transition to the operation mode occurs upon completion of resetting.
Note:
Do not change the default value of (1)~ (5), (8)~ (16) they are the parameter for adjusting in the factory.
Engine maintenance mode menu system
l l