Oki OKIPAGE 24DX Service Manual page 117

Page: 51
Service Guide OKIPAGE 24DX/24DXn
Chapter 3 Parts Replacement
3.3.21 Transfer Roller / TR Gear / TR Bearing
(1) Open the stacker cover .
(1) (1) (2)
(2) Unlock the lock by lifting the TR gear to remove the TR gear and roller transfer . (Use the Holder-TR
Eject (5) for the removal.)
Note !
Don't place the removed roller transfer directly on the desk and so on. When placing it, lay a paper and the
like under it.
(3)
(3) Remove right and left bearings from the frame-main by sliding them inside while pushing them. At the same
(4)
time, remove the 2 transfer springs .