General Mechanism - Oki OKIPAGE 24DX Service Manual

Page: 197
Service Guide OKIPAGE 24DX/24DXn
Chapter E Multi Feeder Maint. (option)

2.1 General Mechanism

The sheet (or envelope) at the very bottom of the stack is fed into the printer, one at a time, when the Multi Feeder
receives the signal from the printer.
(1) First, the hopping motor rotates in the direction of arrow D. The planet gear F moves to the direction of arrow G,
and drives rollers A and B. The roller C is linked to pulley I which is on the same shaft as roller A, and it also turns at
the same time as roller A. The paper is fed for a predesignated distance until the leading edge reaches roller C.
(2) Next, the hopping motor rotates in the direction of arrow E. The planet gear F moves to the direction of arrow H,
and drives idle gear J. The rotation of idle gear J is transmitted to the gears linked to it, and drives pulley I on the
same shaft as roller A, turning roller C to feed the paper into the printer, until it reaches the registration roller of the
printer. During this process, a one-way bearing is engaged at pulley I so that the rotation of pulley I is not transmitted
to roller A, preventing any feeding of papers by roller A.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)