Lcd Status Message List - Oki OKIPAGE 24DX Service Manual

4.3.1 LCD Status Message List

The listing of the statuses and problems displayed in the form of messages on the LCD is provided in Table 4-1.
Classification LCD Status Message
Jam error
Paper size error
Tray paper Error
mmmmmmmm:
Paper size in the tray
being selected
Interface timeout
* : 2 or 3
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIPAGE 24DX/24DXn
Chapter D Second / Third Paper Feeder Maint (option)
Description
Notifies of occurrence of jam
while the paper is being fed from
the Second / Third Paper Feeder
Notifies of incorrect size paper
feeding from the Second / Third
Paper Feeder.
Notifies of no paper or paper
cassettes state of the Second /
Third Paper Feeder.
Notifies of occurrence of
interface timeout between the
printer and the Second / Third
Paper Feeder.
Page: 187
Recover Method
- Check the paper in the Second
/ Third Paper Feeder. Carry out
the recovery printing by opening
the cover, removing jammed
paper and closing the cover, and
then turning the error display off.
- When the problem occurs
frequently, go through the
Troubleshooting.
- Check the paper in the Second
/ Third Paper Feeder. Also check
to see if there was a feeding of
multiple sheets. Carry out the
recovery printing by opening the
cover, and then turning the error
display off.
- Load the paper or paper
cassette in the Second / Third
Paper Feeder.
- Verify connection of Board -
BBB and square-shaped
connector. Replace the
square-shaped connector if
necessary.
- Replace Board - BBB.