Page: 204
Service Guide OKIPAGE 24DX/24DXn
Chapter E Multi Feeder Maint. (option)
3.3.2 AOLE-PCB
(1) Remove the upper cover (see 3.1.1 (1) to (3)).
(2) Remove two screws (1) and remove the AOLE-PCB (2).
(3) Remove the connector (3).
(4) Remove the connector (4).
Caution:
Be careful to set the sensor plate properly when mounting AOLE-PCB.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)