Table of Contents
Advertisement
MFP is connected to a PBX but it is not possible to dial out.
Be certain that the dial prefix is entered before the telephone
number for each number dialled or programmed into the MFP
(See "Connecting to a PBX" on page
MFP always answers before its possible to use the
external telephone. If an external telephone is connected,
change the MFP's ring response setting
on page
67).
Faxes received sometimes look distorted. If the document
received is wider or longer than the paper loaded in the paper
tray, the machine automatically reduces the width or length of
the document so that it will fit on the paper. This type of problem
could also be communication related.
LCD
MESSAGE LIST
NOTE
1. <%color%> = Y, M, C or K.
2. <%tray%> = Tray 1, Tray 2 or MP Tray.
3. <%job_cancel%> = Log buffer full, job rejected invalid
ID or job rejected.
4. mmm = the setup of "paper supply".
5. ppp = the setup of "media type".
I
NFORMATION AND WARNING MESSAGES
STATUS
MESSAGE
/ CODE
Initializing
Check Data
Rec data error <%DLCODE%>
Troubleshooting > 166
71).
(See "Advanced set up"
MEANING / ACTION
<%DLCODE%>
1.Size error.
2.Check SUM error.
3.Printer model No. error.
4.DModule I/F version error.
5.FAT version error.
Restart the machine. (Turn it off
and on again).
If the code still appears, contact
your dealer.
Advertisement
Table of Contents
