Roller A - Oki OKIPAGE 24DX Service Manual

Page: 209
Service Guide OKIPAGE 24DX/24DXn
Chapter E Multi Feeder Maint. (option)

3.3.7 Roller A

(1) Remove the motor bracket assy (see 3.3.5).
(2) Remove two gears (1) and then another gear (2).
(3) Disengage the plate (3) and the frame (4).
(4) Remove four screws (5) and remove the frame (4) (see 3.3.6).
(5) Move the belt to the right and remove it from the one-way pulley (6).
(6) Move the carrier roller assembly to the right, and remove it from the shaft (7).
(7) Move the roller A (8) to the right, lift its left side, and then pull it off to the left. (Be careful not to lose the shaft (7)
being removed together.