Changing The Roughness Of Print; Setting The Status Message; Setting The Auto Clear Function; Managing The Option Licenses - Oki mc760x User Manual

2
Select the paper type and press [OK].
Note
• Depending on the machine settings, the screen to
select the paper type may not be displayed. In this
case, proceed to the next step.
3
Select the calibration settings.
Item name
DEFAULT Press this button to restore the
default calibration setting and return
to the previous screen.
CALIBRATION Press this button to calibrate using
the printed chart. In this case,
proceed to the next step.
4
Place the printed chart face down on the
glass, so that the two black rectangular
marks are placed on the left side.
5
Press the [START] button on the control
panel.
The calibration begins. Do not operate the equipment
until the message "Scanning and calibrating" disappears.
Note
• If the chart is not properly placed, the message "Set
chart correctly" is displayed on the touch panel. In this
case, return to step 3 and realign the chart.

Changing the roughness of print

You can switch the line density level of images in printing.
This setting applies to print jobs with 600 dpi. Set this to color
and black printing, respectively.
Item name
HIGH Press this button to print with the normal line
density level.
LOW Press this button to print with the lower line
density level than a normal one.
Memo
• Changing the setting displays the CONFIRMATION screen
that asks you whether you want to perform calibration or
not. Select [OK] or [CANCEL] as required.
Description
Description

Setting the status message

You can have a status message displayed at the bottom of the
touch panel, notifying the occurrence of specified events, such
as paper empty and toner low.
Press [ON] or [OFF] for each status message and press [OK].
Item name
TONER NEAR Enabling this option displays a message
EMPTY at the lower left of the screen when toner
MESSAGE is low in a toner cartridge.
PAPER EMPTY Enabling this option displays a message
MESSAGE at the lower left of the screen when there
is no paper in a tray.

Setting the auto clear function

You can set how long the machine waits before clearing the
previous operation left uncompleted on the control panel.
Press the desired period of time (in seconds). If you want to
disable the Auto Clear function, press [NO LIMIT].
Note
• Selecting [NO LIMIT] does not clear the control panel for
any mode including the SETTING, JOB STATUS, and
TEMPLATE screens.

Managing the option licenses

You can view product information, such as the license ID for
certain options. You can also install these options on the
equipment if necessary.
 P.258 "Viewing product information"
 P.259 "Installing an option"
For installation, be sure to follow the dealer's instructions.
Viewing product information
1
On the LICENSE MANAGEMENT screen,
select the option for which you want to
confirm product information, and press
[DETAILS].
The LICENSE DETAILS screen is displayed.
- 258 -
SETTING ITEMS (ADMIN)
Description
1
2
3
4
5
6
7