4.2.3 Setting of LED head drive time
As the OKIPAGE 24DX Series automatically judges head type and head drive time, there is no need for changing
any setting in replacing LED head. But individual setting can be changed by ENGINE Maintenance menu as before.
The procedure in such case shown below.
l
Luminous intensity marking label
l
Setting of LED head drive time
Drive time of the LED head is to set parameter of drive time setting values corresponding to the luminous intensity
displays marked on the LED head to EEPROM.
a. Corresponding table of luminous energy display and drive time parameter
Service Guide OKIPAGE 24DX/24DXn
Chapter 4 Adjustment
Page: 76