Oki OKIPAGE 24DX Service Manual page 166

4.1.3 Engine maintenance mode
l
The engine maintenance mode is activated when the power is turned ON while pressing the Form Feed key and
Enter key.
l
This mode adopts the menu for function selection.
l
The method for exit from this mode depends on the setting.
l
The engine maintenance mode is provided with the following functions:
(1) Head type setting select LED Head type
l
Sets the select LED head type.
(2) Head drive time setting
l
Sets the drive time of the LED head.
(3) Head drive time setting at auto head type
l
This function sets head drive time, when " HEADTYPE= AUTO" is selected.
(4) Head strobe time at 600 x 1200 dpi
l
This function sets head strobe time at 600 x 1200 dpi.
(5) Printing start position setting
l
Sets the printing start position.
(6) Drum count total display
l
Displays on the LCD the total number of drum revolutions in the unit counted at the engine.
(7) Drum count display
l
Displays on the LCD the total number of EP drum revolutions counted at the engine.
(8) Setting of standard tray paper feed length
l
This function sets the paper feed length of standard tray paper.
(9) Setting of front feeder paper feed length
l
This function sets the paper feed length of the front feeder.
(10) Setting of High Capacity Second Paper Feeder paper feed length
l
This function sets the paper feed length of the High Capacity Second Paper Feeder.
(11) Selection of High Capacity Second Paper Feeder download table
l
This function selects the download table for the High Capacity Second Paper Feeder.
Service Guide OKIPAGE 24DX/24DXn
Chapter 4 Adjustment
Page: 71