Oki OKIPAGE 24DX Service Manual page 194

Paper of improper size was fed
from the tray.
tttttt: MANUAL, TRAY1, TRAY2,
FRONT, FEEDER
Informs that, in feeding papers
from tray n to the Duplex unit, a
jam occurs in the separator or
Duplex unit, by monitoring
OUTSNS ON ~ DUP INSNS ON.
Tray n : Tray1, Tray2, Tray3,
Front Multi Feeder
Informs that, in feeding papers
from n tray to the Duplex unit, a
jam occurs in the separator or
Duplex unit, by monitoring DUP
INSNS ON DUP ~ INSNS OFF.
Informs that, in feeding papers
from n tray to the Duplex unit, a
jam occurs when a paper is
reversed to the reverse roller of
the Duplex unit, by monitoring
MOTOR (Duplex) ON ~ DUP R
SNS ON.
Informs that, in feeding papers
from n tray to the Duplex unit, a
jam occurs when a paper is
impinge-fed in the Duplex unit,
by monitoring DUP R SNS ON ~
DUP F SNS ON.
Jam which occurs in feeding
papers to the Duplex when the
first tray cassette is pulled out in
paper-remaining state.
Structurally, no first try cassette
will cause no reverse root for
papers and open the Duplex
cover downwards.
Informs that a jam occurs during
paper running after exiting from
the tray.
Informs that a jam occurs during
paper running after exiting from
the tray.
Check the paper in the tray or
check to see if more than one
sheet of copy were fed
simultaneously. Open the cover,
then close it to perform recovery
printing and the error display is
released. If this error occurs
frequently, see Section 6.5.2.
Remove all of the paper in the
printer. Open the cover, then
close it to perform recovery
printing and the error display is
released.
Remove all of the paper in the
printer. Open the cover, then
close it to perform recovery
printing and the error display is
released.
Remove all of the paper in the
printer. Open the cover, then
close it to perform recovery
printing and the error display is
released.
Remove all of the paper in the
printer. Open the cover, then
close it to perform recovery
printing and the error display is
released.
Remove all of the paper in the
printer. Open the cover, then
close it to perform recovery
printing and the error display is
released.
Check the paper in the cassette.
Open the cover, then close it to
perform recovery printing and
the error display is released. If
the error occurs frequently, see
Section 6.5.2.
Open the cover, remove the
paper, then close the cover.
When the cover is closed,
recovery printing is performed
and the error display is released.
If the error occurs frequently,
see Section 6.5.2.