Separator - Oki OKIPAGE 24DX Service Manual

Page: 203
Service Guide OKIPAGE 24DX/24DXn
Chapter E Multi Feeder Maint. (option)

3.3.1 Separator

(1) Turn the printer power off and remove the Multi Feeder.
(2) Disengage the link and hopper cover.
(3) Remove two screws (1), disengage two locks of the upper cover (2) using a flat-head screwdriver, and remove
the upper cover (2).
(4) Remove two pan-head screws (3) and remove the cover frame (4).
(5) Disengage the plate and the frame. (Refer to 3.3.6.)
(6) Remove two screws (5) and remove the separator assy (6).
(7) Lift the paper stay (7) and disengage it from the separator bracket (8), then remove the separator 9. The spring
(10) comes off at the same time, so be careful not to lose it.