Oki OKIPAGE 24DX Service Manual page 158

(9) Duplex adjust
l
The function which performs a correction in Y direction towards the sheet supplied from the tray in double-sided
printing.
(10) Select paper source command parameter (Second tray)
l
The function which sets the parameter selecting the second tray by paper source command (ESC & N # H) on
PCL. (11) Select paper source command parameter (Third tray)
l
The function which sets the parameter selecting the third tray by paper source command (ESC & N # H) on
PCL.
(11) Select paper source command parameter (Third tray)
l
The function which sets the parameter selecting the third tray by paper source command (ESC & l # H) on PCL.
(12) Select paper source command parameter (Front tray)
l
The function which sets the parameter selecting the front tray by paper source command (ESC & N # H) on
PCL.
(13) Page placement
l
The function which aligns a printing image to the right.
(14) SETTING
l
This function is used to adjust to improve print quality.
-2 } Rough/thick paper, Low temperature/humidity and/or blotchy faded print appeared.
-1 } Rough/thick paper, Low temperature/humidity and/or blotchy faded print appeared.
0 } Normal media/environmental conditions.
+1 } Rough papers, high temperature/humidity and/or snowy print of high density pattern.
+2 } Rough papers, high temperature/humidity and/or snowy print of high density pattern.
(15) Cleaning cycle
l
Set the page interval to perform Cleaning Sequence.
When stains build up especially in using rough papers. Change the cleaning cycle. The shorter the cycle is set, the
less the stains become.
Normal : Each 20th page (default)
Middle : Each 10th page
High : Each 3rd page
User maintenance mode menu system