Online/Offline On Power Up; Postamble, Set; Preamble, Set; Print Speed, Set - Intermec 4630 User Manual

Online/Offline on Power Up

Selects the printer to be online or offline when it is turned on.
Purpose:
Syntax:
<SI>O n
n = 0
n ≠ 0
n = 0
Default:
Notes: This command becomes effective after a printer reset or power up.

Postamble, Set

Sets the postamble character to n.
Purpose:
Syntax:
<EOT> n
n can be any ASCII character. When n = <NUL>, no postamble character is
sent.
n = <NUL>
Default:

Preamble, Set

Purpose: Sets the preamble character equal to n.
Syntax:
<SOH> n
n can be any ASCII character. When n = <NUL>, no preamble character is sent.
Default: n = <NUL>

Print Speed, Set

Sets the print speed in inches per second (ips).
Purpose:
Syntax:
<SI>S n
4630 n must be from 20 to 80 (2.0 to 8.0 ips) in multiples of 5.
4830 n must be from 20 to 50 (2.0 to 5.0 ips) in multiples of 5.
Default: n = 35, 4630
n = 25, 4830
Printer is online on power up.
Printer is offline on power up.
Configuration Commands
6
6-35