Configuration Parameters, Transmit; Cut; Data Shift - International Characters; Field, Select - Intermec 4630 User Manual

Configuration Parameters, Transmit

Uploads the current configuration commands from the printer.
Purpose:
Syntax:
<ESC>p
Notes: Only the configuration parameters that can be set from the host are received.
Use this command to view, edit, or copy the current configuration command
settings.

Cut

Purpose: Advances the label out to the cutter and cuts the label stock.
Syntax:
<SO>
Notes: This command is only executed if the cutter is installed but not enabled.
Data Shift – International Characters
Purpose: Allows command characters to be entered as data.
Syntax:
<SUB>
Notes: An error code is generated if no character follows this command.

Field, Select

Purpose: Selects a data field for entering or working with data.
Syntax: <ESC>F n or <ESC>F[" name" ]
n can range from 0 to 199.
Default: n = 0
Notes: The parameter for this command may be either the field number or the field
name. It cannot be both. If neither are present, the printer defaults to 0.
If the field number is used, all following data is entered into field n. If the field
name is used, all following data is entered into all fields with that name in the
current format or page. The field name must be bracketed by quotation marks
(" ").
An error code (33) is generated if an invalid field number is entered.
Print Mode Commands
6
6-23