Line Field, Create/Edit; Outline Font Description, Download - Intermec 4630 User Manual

4630 and 4830 Bar Code Label Printers User's Manual

Line Field, Create/Edit

Use this command to access or create a line field n.
Purpose:
Syntax:
L n [, name ]
n values can range between 0 and 199.
,name is an optional field. The field can be up to eight ASCII characters (not
counting the semicolon) and cannot start with a numeric character.
Default: n = 0
Notes: Parameters for the default field:
Field origin = 0,0
Field direction = 0°
Line length = 100
Line width = 1

Outline Font Description, Download

Purpose: Use this command to download an outline font description. All characters are
loaded at once; not individually as with bitmap fonts. Since the maximum
message length is 255 characters, the data may have to be split between
successive j commands.
Syntax:
j font description ...
The printer stores all incoming data into the font selected with the Outline User
Notes:
Defined Font (J) command.
Example: J4, font name;
x30;y30;
jAFB0...4E; (maximum 255 characters)
jB32C...FF; (maximum 255 characters)
The font information must be sent to the printer as a string of ASCII characters
in hexadecimal form. The printer expects two hex digit bytes for every eight-bit
byte of information. Data must be nibblized ASCII hex characters.
6-62