Intermec 4630 User Manual page 59

To set the media length
1. From the OFFLINE READY display, press Menu and then press ↑ or ↓
until you reach the Configuration menu.
2. Press Select and then press ↑ or ↓ until the display shows:
CONFIGURATION
MEDIA ALERT
3. Press Select and then press ↑ or ↓ until the display shows:
MEDIA ALERT
MEDIA LENGTH
4. Press Select. The display shows the current setting with a cursor under the
first digit, for example:
MEDIA LENGTH
06000 INCHES*
5. Press ↑ to increase the digit or press ↓ to decrease the digit. Press Select to
move the cursor to the next digit.
Note: Pressing Select at the last digit moves the cursor to the first digit.
6. Press Enter when you have the media length you want.
7. Press Cont to return to the OFFLINE READY display.
To set the low media warning
1. From the OFFLINE READY display, press Menu and then press ↑ or ↓
until you reach the Configuration menu.
2. Press Select and then press ↑ or ↓ until the display shows:
CONFIGURATION
MEDIA ALERT
3. Press Select and then press ↑ or ↓ until the display shows:
MEDIA ALERT
LOW MEDIA WARN
4. Press Select. The display shows the current setting for the Low Media Warn
command with the cursor under the first digit.
5. Press ↑ to increase the digit or press ↓ to decrease the digit. Press Select to
move the cursor to the next digit.
6. Press Enter when you have the value you want.
7. Press Menu and then press ↑ or ↓ until the display shows:
MEDIA ALERT
SET WARNING
Operating and Configuring the Printer
2
2-25