4630 and 4830 Bar Code Label Printers User's Manual
4630 and 4830 Printer Specifications
This section lists the specifications and performance parameters for the 4630
and 4830 printers.
Communications
Interface
Baud Rate
Character Set
Word Length
Handshaking
Input Buffer
Electrical
Power Source
Circuit Protection
Grounding
Environmental
Operating Temperature
Storage Temperature
Humidity
Ventilation
Dust
A-4
IEEE RS-232C or RS-422
110, 300, 600, 1200, 2400, 4800, 9600, or 19,200
ANSI ASCII character set
Selectable 7-bit or 8-bit data format
XON/XOFF (in receive mode only) and CTS/DTR
Approximately 7000 bytes.
XOFF is transmitted and DTR goes low when 750 bytes
are available in the buffer.
XON is transmitted and DTR goes high when 750 bytes
remain in the buffer.
Characters are transmitted with no parity from the
printer.
115/230 VAC, 50/60 Hz, auto ranging, switching
power supply.
(2) 8 amp, 250V fuses
Unit must be connected to a properly grounded
receptacle.
40º F to 100º F (4º C to 38º C)
32º F to 120º F (0º C to 49º C)
10% to 95% non-condensing
Forced air movement
Non-conducting, non-corrosive