Hibc Code 39 - Intermec 4630 User Manual

4630 and 4830 Bar Code Label Printers User's Manual
Notes: The variable length option (,m2) selects the UPC/EAN version by the number
of characters in the data field. The number of data characters and check
characters allowed for each version are:
EAN 8
EAN 13
UPC version A
UPC version E
UPC version D1
UPC version D2
UPC version D3
UPC version D4
UPC version D5
Use " " to delimit the bar code data from the supplemental data. Data to the
right of " " is supplemental data; data to the left is bar code data. You can add
the two- or five-digit supplemental data to any version of the UPC/EAN code.
The flag 1 option only applies to EAN 8, EAN 13, and UPC version A. For EAN
13, enabling the flag 1 option prints the first character of the bar code
interpretive. For EAN 8 and UPC version A, enabling the flag 1 option moves
the first and last character of the bar code interpretive outside of the guard
bars.

HIBC Code 39

Syntax:
c8[ ,m1 ][ ,m2 ]
The following three modifiers conform to Supplier Standard:
c8,0
c8,1
c8,2, m2
The following four modifiers conform to Provider Standard:
c8,3
c8,4
c8,5, m2
c8,6
,m1 = 0
Default:
6-42
7 data + 1 check character
12 data + 1 check character
11 data + 1 check character
6 data + 1 check character
13 data + 1 check character
18 data + 2 check characters
22 data + 2 check characters
25 data + 3 check characters
29 data + 3 check characters
Select HIBC Code 39. Primary format.
Select HIBC Code 39. Alternate primary format.
Select HIBC Code 39. Secondary format. The linkage
character comes from ,m2, which is the field identifier.
Single format.
First data format.
Select HIBC Code 39. Second data format. The linkage
character comes from ,m2, which is the field identifier.
Select HIBC Code 39. Multiple data format.