Intermec 4630 User Manual page 92

4630 and 4830 Bar Code Label Printers User's Manual
3. Create command strings for each type of field. You must bracket your field
4. Combine the command strings you define into one file and add the
5. Create the data lines for the human-readable field and the bar code field.
5-6
For example, you need to define the following parameters for a human-
readable field:
Parameter
field type
field origin
font
field direction
height
width
field source and number of characters
information between the start of text character (<STX>) and the end of text
character (<ETX>).
When you combine the parameters in the previous table into a command
string, it should look like this:
<STX>H0;o150,75;c28;f0;h30;w30;d0,20;<ETX>
following commands bracketed by <STX> and <ETX>:
Command Description
<ESC>P
Enters Program mode
E4;F4;
Erases what was in format 4 and creates a new format 4
R
Saves the format and exits to Print mode
<ESC>E4 Accesses format 4
<ETB>
Prints the format
Do this by completing the following tasks:
a. Type the information that you want to appear in the human-readable
field and the bar code field on two separate lines.
b. Separate the information with a <CR> at the end of the first text string.
The <CR> tells the printer to enter the text into the next field. The first
line will be the text for the human-readable field and so on.
Value for This Example
H0
o150,75
c28 (proportional outline font)
f0 (horizontal)
h30 (multiplied 30 times)
w30 (multiplied 30 times)
d0,20