4630 and 4830 Bar Code Label Printers User's Manual
Remaining Quantity and Batch Counts, Transmit
Uploads the remaining quantity and batch counts for the current print job.
Purpose:
Syntax:
<ESC>Q
Reset
Purpose:
Executes a printer power up reset immediately.
Syntax:
<DLE>
Notes:
All data and commands in the input buffer are erased.
Status Dump
Purpose:
Causes the printer to upload all current printer status.
Syntax:
<VT>
The printer status is uploaded in the following order (top to bottom, from left):
<GS>
<US>
<US>
<EM>
<DC3>
Status Enquiry
Purpose:
Transmits the current printer status to the host.
Syntax:
<ENQ>
Notes:
If more than one status is true, the printer transmits the status with the highest
priority (top to bottom, from left):
<GS>
<US>
<US>
<EM>
<DC3>
6-20
Buffer already full
Paper path open
Ribbon fault
No label stock
Buffer now full
Buffer already full
Paper path open
Ribbon fault
No label stock
Buffer now full
Takeup reel full
<BS>
Label at strip pin
<FS>
Skipping
<DC1>
Printing
<DC1>
Ready
<DC1>
Takeup reel full
<BS>
Label at strip pin
<FS>
Skipping
<DC1>
Printing
<DC1>
Ready
<DC1>