Message Delay, Set; Number Of Image Bands, Set; Online Or Offline On Power-Up - Intermec 3440 User Manual

3440 Bar Code Label Printer User's Manual

Message Delay, Set

Purpose: Sets the message delay to n milliseconds.
Default: n = 0
Syntax:
<ESC><SYN> n
You must set n to be a number from 0 to 9999 milliseconds. It is the delay at
the start of a printer transmission.
Notes: This command is effective upon execution.

Number of Image Bands, Set

Purpose: Selects the number of image bands.
n = 3
Default:
Syntax:
<SI>I n
n must be a number from 2 to 9 if you have 1 MB of DRAM in the printer. If
you have expanded memory in the printer, n can range from 2 to 20.
Notes: This command is effective upon execution.

Online or Offline on Power-Up

Syntax:
<SI>O n
Notes: The 3440 printer ignores this command.
6-46
*1233*
FranklinGothic
FG 9pt Italic
*1233*