Connect The Printer To Power - Intermec PC23 User Manual

Chapter 1 —

Connect the Printer to Power

6
Use only the AC power adapter supplied with the printer. The use
of a power adapter not approved by Intermec voids the product
warranty and may damage the printer.
1 Connect the power adapter to the power port on the rear of the
printer.
2 Connect the power adapter to AC power. When the adapter is
connected to power, the green LED in the adapter connector turns
on and stays on.
3 Press the power switch to turn the printer on. As the printer starts
up:
• a progress bar appears on the LCD printer screen. When the
printer has finished starting up, the Ready screen appears, and
the blue Ready-to-Work™ indicator turns on and stays on.
• the icons turn on and then turn off one at a time on the icon
panel. When the printer has finished starting up, the blue
Ready-to-Work indicator turns on and stays on.
If a condition occurs that will prevent printing, the Ready-to-Work
light blinks.
PC23 and PC43 Desktop Printer User Manual