Maxicode - Intermec 4630 User Manual

4630 and 4830 Bar Code Label Printers User's Manual

Maxicode

Syntax:
c14[ ,m1 ][ ,m2 ][ ,m3 ]
Defaults: ,m1 = 0
,m2 = 1
,m3 = 1
When you select Maxicode, you must format your data to conform to five
Notes:
fields.
Field
You can format the data with or without inserting delimiters between the fixed-
length fields, governed by the number of characters comprising the field. An
example format without delimiters is shown below:
Field
Note: Remember, the d3 command defines the data source in Program mode.
Or, you can format data using the carat-delimiting field, as shown in the next
example:
Field
With this method of delimiting data, fields can be left out (as long as the carats
remain) and the firmware will fill in the default as shown in the following
example. With the carat-delimited format, you must completely fill in all fields,
except the message field.
6-48
Mode 0, Structured Carrier Message.
Not supported at this time.
Not supported at this time.
Characters
Allowed
1 5
2 4
3 3
4 3
5 84
2 3 4
1
d3,068107317999840UP TO 84 CHARACTER MESSAGE
1 2 3
Field Description
ZIP code
ZIP code extension
Service class
Country code
Message
5
4
5
4630U-36
Default
None
None
999
840 (U.S.)
None
4630U-35