About This Manual - Intermec 4630 User Manual

About This Manual

This manual contains all of the information necessary to install, operate,
configure, design labels, troubleshoot, and maintain your Intermec 4630 or 4830
printer.
Terms and Conventions
The following special terms and conventions occur throughout the manual for
operating procedures and descriptions of the printer.
•
"Printer," "4630," or "4830" refer to the 4630 and 4830 bar code label
printers. Unless specifically stated, all information in this manual applies to
both printer models.
•
"Media" is the label stock on which the printer prints labels.
•
"Host" refers to a personal computer or other computer that communicates
with the printer.
•
On line/Off line, Feed/Reload, and Cancel refer to the keys on the printer
control panel.
•
Select, Menu, Enter, Cont, ↑ , and ↓ refer to the keys on the printer menu
panel.
•
Messages on the printer display are represented by boxed text:
OFFLINE
SERVICE MENU
•
Downloaded commands appear in the order you enter them into the
printer with the following conventions:
Convention Description
< > Angle brackets < > enclose mnemonic representations of ASCII
control characters. For example, <ETX> represents the ASCII
"End of Text" control character.
data Italic text represents variable data, which you must replace with
a real value. For example, n signifies a variable for which you
must designate a constant value.
[data] Italic text within brackets represents optional data.
Ctrl Bold text represents a key on your keypad. For example, Ctrl
represents the Ctrl key and M represents the letter M key.
When two keys are joined with a dash, press them
Ctrl-Z
simultaneously. For example, if you see the command Ctrl-C,
press the two keys at the same time.
E3;F3
Type all characters that appear in the Courier font by pressing an
individual key on the keypad.
Before You Begin
xvii