Intermec 4630 User Manual page 93

FG 9pt Italic
c. Preface the data lines with the <CAN> command. It erases all data in
the current format.
Your command strings should look like this:
<CAN>
THIS IS THE SAMPLE LABEL <CR>
SAMPLE
d. Bracket the command strings between <STX> and <ETX>.
6. Combine all of the command strings into one format and it should look like
this:
Command
<STX><ESC>P<ETX>
<STX>E4;F4;<ETX>
<STX>H0;o150,75;f0;c28;h30;w30;d0,30;<ETX>
<STX>L1;o150,75;f0;l600;w5;<ETX>
<STX>B2;o300,125;c13,0;h7;<ETX>
<STX>R;<ETX>
<STX><ESC>E4<ETX>
< STX><CAN><ETX>
<STX>THIS IS THE SAMPLE LABEL<CR><ETX>
<STX>SAMPLE<ETX>
<STX><ETB><ETX>
Note: The line breaks in this example are shown for formatting purposes only and do
not necessarily represent carriage returns. Also, the difference between the lowercase
letter "l" and the numeral "1" is not very noticeable in the Courier font. Make sure
that you enter the correct command.
*1233*
Designing Labels Using IPL Commands
Definition
Enter Program mode
Erase format 4, create format 4
Edit/create human-readable field 0
Edit/create line field 1
Edit/create bar code field 2
Save format and exit to Print mode
Access format 4
Erase all data
Data for human-readable field 0
Data for bar code field 2
Print
5
5-7