Debug Spanning-Tree Bpdu-Opt - Cisco Catalyst 2950 Command Reference Manual

debug spanning-tree bpdu-opt

debug spanning-tree bpdu-opt
Use the debug spanning-tree bpdu-opt privileged EXEC command to enable debugging of optimized
spanning-tree bridge protocol data units (BPDUs) handling. Use the no form of this command to disable
debugging.
Syntax Description
detail
packet
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(6)EA2
Usage Guidelines The undebug spanning-tree bpdu-opt command is the same as the no debug spanning-tree bpdu-opt
command.
Related Commands Command
show debugging
show spanning-tree
Catalyst 2950 and Catalyst 2955 Switch Command Reference
C-14
debug spanning-tree bpdu-opt [detail | packet]
no debug spanning-tree bpdu-opt [detail | packet]
(Optional) Display detailed optimized BPDU-handling debug messages.
(Optional) Display packet-level optimized BPDU-handling debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Configuration Fundamentals
Command Reference for IOS Release 12.1 > Cisco IOS System
Management Commands > Troubleshooting Commands.
Displays spanning-tree state information.
Appendix C Catalyst 2950 and 2955 Switch Debug Commands
OL-10102-01