Show Cluster Candidates - Cisco Catalyst 2950 Command Reference Manual

show cluster candidates

show cluster candidates
Use the show cluster candidates privileged EXEC command on the command switch to display a list
of candidate switches.
Syntax Description
detail
mac-address H.H.H.
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.0(5.2)WC(1)
Usage Guidelines
You should only enter this command on a command switch.
If the switch is not a command switch, the command displays an empty line at the prompt.
The SN in the output means switch member number. If E is in the SN column, it means that the switch
is discovered through extended discovery. If E does not appear in the SN column, it means that the switch
member number is the upstream neighbor of the candidate switch. The hop count is the number of
devices the candidate is from the command switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show cluster candidates command:
Switch# show cluster candidates
MAC Address
00d0.7961.c4c0 c2950-012
00d0.bbf5.e900 ldf-dist-128 WS-C3524-XL
00e0.1e7e.be80 1900_Switch
00e0.1e9f.7a00 c2924XL-24
00e0.1e9f.8c00 c2912XL-12-2 WS-C2912-XL
00e0.1e9f.8c40 c2912XL-12-1 WS-C2912-XL
0050.2e4a.9fb0 C3508XL-0032 WS-C3508-XL E
0050.354e.7cd0 C2924XL-0034 WS-C2924-XL E
Catalyst 2950 Desktop Switch Command Reference
2-142
show cluster candidates [detail | mac-address H.H.H.] [ | {begin | exclude | include} expression]
(Optional) Display detailed information for all candidates.
(Optional) Hexadecimal MAC address of the cluster candidate.
(Optional) Display begins with the line that matches the specified
expression.
(Optional) Display excludes lines that match the specified expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
Name Device Type PortIf
WS-C2950-12 Fa0/5
Fa0/7
1900 3
WS-C2924-XL Fa0/5
Fa0/4
Fa0/1
Chapter 2 Cisco IOS Commands
|---Upstream---|
FEC Hops SN PortIf FEC
1 0 Fa0/3
1 0 Fa0/24
0 1 0 Fa0/11
1 0 Fa0/3
1 0 Fa0/7
1 0 Fa0/9
78-11381-05