Removing The Internal Raid Controller - Fujitsu PRIMERGY RX2530 M6 Upgrade And Maintenance Manual

Expansion cards and backup units
▶
"Updating expansion card firmware" on page
▶
"Resuming BitLocker functionality" on page
9.6.7

Removing the internal RAID controller

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH1 / (+) No. 1 screw driver
– Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
Figure 162: Removing the internal RAID riser module
242
48.
Upgrade and Maintenance Manual
83.
93.
Hardware: 5 minutes
75.
49.
52.
48.
RX2530 M6